[Volume Limited] KPTEC Kids Safety Foldable On-Ear Headphones with Mic, Volume Controlled at Max 93dB to Prevent Noise-induced Hearing Loss (NIHL), Passive Noise Reduction, Wired Earbuds,Blue

  • 1.CHILD HEARING SAFETY MATTERS – other earbuds can dangerously exceed the levels recommended by health experts. Noise-induced hearing loss can start showing up in even young children, and it can have long-term impacts on their academic performance. All KPTEC kids headphones are limited to a maximum volume of 93db.
  • 2.PASSIVE NOISE REDUCTION – Noise from outside is reduced with our headphones padding design, it will make kids use less volume than their regular needs.
  • 3.ERGONOMIC & PORTABLE DESIGN FOR YOUR KIDS – This kids headphones are well padded that are much comfortable and won’t hurt ears like traditional headphones after long wear. The foldable feature and detachable cord make it portable.

Product Description

[Volume Limited] KPTEC Kids Safety Foldable On-Ear Headphones with Mic, Volume Controlled at Max 93dB to Prevent Noise-induced Hearing Loss (NIHL), Passive Noise Reduction, Wired Earbuds,Blue : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

How to connect (pair) a Bluetooth earphone with a computer

For Windows

First, how to connect a PC to Bluetooth earphones is explained for Windows 10. The steps are as follows:

1. Click the “Start button” and go to “Settings”-> “Devices.”

2. Select the item “Bluetooth” on the left side of the device screen. Then the search for surrounding Bluetooth devices starts.

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. After a while, pairing is ready, and the button “Pairing” will appear. Click it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.

For macOS

1. Click “System Preferences” from the Apple menu and go to “System Preferences.”

2. From the System Preferences screen, select the item “Bluetooth.” Then it will be in the mode to search for nearby Bluetooth devices. If “Bluetooth: Off” is displayed, click “Turn on Bluetooth.”

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. Click the “Pair” or “Connect” button next to it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.