Marshall Major On-Ear Headphones, Pitch Black (4091114) : Product Description
The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.
Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.
Turn on Bluetooth on the player side (transmitting side).
* The following image is a screenshot of my iPhone.
※iPhone6S! The appearance may be slightly different depending on the version!
Please turn on the power of the earphone (receiving side) and set it to the pairing mode.
Pairing, i.e., connection mode! This process tends to stumble. It’s not the end after turning on the power. For most devices, the pairing mode is often set by pressing and holding the power button from power-off until the lamp flashes red and blue. Light or not, there are various and Tari a button of the playback is stopped, not the power switch, but generally is long press from the time of power supply OFF is!
Select the model of the earphone (reception side) on the player side (transmission side).
※ iPhone6S! The appearance may be slightly different depending on the version!
One point advice ☆
In many cases, the connection after the first time skips the pairing process in step 2 and connects the transmitter and receiver. If you can’t connect, try pairing again!
*The setting screen differs depending on the OS version.
The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.
* If the [Bluetooth] function is [Off], set it to [On].
* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.
This completes the pairing process with the headphones.