Urbanears Sumpan in-Ear Headphones, Indigo (4091381) : Product Description
Wireless communication technology for exchanging data communication between digital devices over short distances.
In other words, in a more familiar sense, the “thing” that connects the remote control for operation with the radio control unit is the image of Bluetooth. Wireless technology that can be operated without wires.
You set up and use a method called “pairing” between your Bluetooth product and your smartphone.
The pair is “Pair,” which means “two things become one.”
It is the same meaning as that pair that is said to be a pair of two at the time of the athletic meet.
Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.
The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.
Select [Settings]-[Wireless & Networks]-[Bluetooth].
* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.
The pairing is completed.
1. Start pairing
First, operate the buttons on the Bluetooth earphone side to start matching.
The operation method differs depending on the earphone or speaker, so check the manual.
* Playing and stopping, power and volume are nothing, but you may start pairing by pressing and holding a relevant button.
2. Add device
Open “Devices and Printers” in Control Panel, and click “Add Device.”
Many people drop out without finding this. Now, click on this to start searching for devices.
When the Bluetooth earphone is detected automatically, the device installation will begin.
Windows now recognize the Bluetooth earphone as a playback device.
3. Priority output for Bluetooth earphones
However, with this alone, you will not be able to hear the sound from the Bluetooth earphone. As before, you will get out of the speaker.
This is because the speaker you have been using has priority over Bluetooth as the output destination.
Go to “Control Panel”-> “Sound,” right-click the icon that says “Bluetooth Audio Device,” and try “Set as Default Device.”
With this setting, the sound of the Windows PC will be played from the Bluetooth earphone, but no sound will be output from the speaker.
Here, when you turn off the Bluetooth earphone, it automatically switches to output from the speaker.
Also, when you turn on the Bluetooth earphone again, the output to the Bluetooth earphone has priority still, and the sound output from the speaker stops.