TaoTronics Neckband Bluetooth Headphones with ANC Active Noise Cancelling Wireless Headphones with Built-In Magnets IPX5 Splashproof 16 Hour Playtime & cVc 6.0 Noise Cancelling MEMS Mic

  • Active Noise Canceling: Neckband Bluetooth headphones come with ANC, canceling noise in the airplane cabin, city traffic, or a busy office; Note: Human voice CANNOT be eliminated
  • Enhanced Call Quality: cVc 6. 0 Noise Cancelling and a MEMS mic effectively reduce vocal interference for clearer conversations via the wireless earphones
  • Long-Lasting Battery: Bluetooth headphones for running last up to 16 hours with ANC off; 8 hours with ANC enabled; and fully charge in only 2 hours
หมวดหมู่: ป้ายกำกับ:

Product Description

TaoTronics Neckband Bluetooth Headphones with ANC Active Noise Cancelling Wireless Headphones with Built-In Magnets IPX5 Splashproof 16 Hour Playtime & cVc 6.0 Noise Cancelling MEMS Mic : Product Description



What is “Bluetooth”?

Wireless communication technology for exchanging data communication between digital devices over short distances.

In other words, in a more familiar sense, the “thing” that connects the remote control for operation with the radio control unit is the image of Bluetooth. Wireless technology that can be operated without wires.

You set up and use a method called “pairing” between your Bluetooth product and your smartphone.

The pair is “Pair,” which means “two things become one.
It is the same meaning as that pair that is said to be a pair of two at the time of the athletic meet.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Windows 10 PC

  • Step 1 Select Action Center at the right end of the taskbar on your computer and select [All Settings].

*The setting screen differs depending on the OS version.

  • Step 2 When the [Settings] screen opens, select [Devices].
  • Step 3 Set the headphones to the device registration mode (pairing mode).
    Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
    There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [Bluetooth and other devices] on the computer, and select the [Add Bluetooth or other devices] button.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 5 When the [Add a device] screen is displayed, select [Bluetooth].
  • Step 6 When [〇〇 (headphone model name)] is displayed, select it.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 7 Confirm that “Connected to music” is displayed under the headphone model name, and select [Done].

This completes the pairing process with the headphones.