KZ AS10 IEM 5 Balanced Armature Driver Earphone, Stereo HiFi KZ in Ear Monitor Headphone Musician Headset with Detachable 2 Pin Cable(No Microphone, Black)

  • 5 Balanced Armature Driver KZ AS10 Earphone: With 5 balanced armature driver on this KZ in ear monitors, 5 balanced armatures response from Low to High frequency, add more definition and show more details in music, provide a balanced sound feature.
  • HIFI Sound: Impressive punch and impact of bass, fast and accurate with quick attack and decay.Full and warm Mids with excellent detail. Highs are well extended but not overly boosted. Sound stage is very wide and individual instruments are easy to locate.
  • 5 Armature Driver Details: KZ AS10 musician in ear monitor uses 5 driver, include one 22955 BA driver for Lows can be comparable to the traditional dynamic driver. 1 piece 296898 for Mids, 2 pieces 30095 for Highs, 1 pieces 31005 for Mid and High.
หมวดหมู่: ป้ายกำกับ:

Product Description

KZ AS10 IEM 5 Balanced Armature Driver Earphone, Stereo HiFi KZ in Ear Monitor Headphone Musician Headset with Detachable 2 Pin Cable(No Microphone, Black) : Product Description



What is the communication distance of Bluetooth?

Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.

Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.

Types of Bluetooth communication distance and communicable distance

One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.

As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.

Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.

Connect headphones directly to your Bluetooth device.

Turn on the headphones and press and hold the Power / Bluetooth button until the Bluetooth light flashes blue. You will hear a prompt saying, “Another device is ready to connect” (if voice guidance is enabled). If the headphones are turned on for the first time, the headphones are already in this state.

The power button on the headphones
Turn on Bluetooth on the connected device (smartphone, tablet, etc.)

In your device’s Bluetooth settings menu, select your headphones. If your headphones do not appear in the list, you will need to tap “Search,” “Scan,” “Pair new device,” etc. in the Bluetooth menu of the device There maybe.

When connected, you will hear an audio prompt saying, “Connected to <device name>.”

Pair with Windows 8.1 / Windows 7 PC

  • Step 1 Select [Hardware and Sound] from [Control Panel] on your computer, and select [Devices and Printers].
  • Step 2 Select [Add Device] at the upper left to display the list screen of the device to be added.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 3 Set the headphones to the device registration mode (pairing mode).

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [〇〇 (headphone model name)] displayed on the [Add a Device] screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Check that the registered headphone model name is displayed on the [Devices and Printers] screen.

This completes the pairing process with the headphones.