Beats Urbeats3 Earphones with 3.5mm Plug – Blue : Product Description
The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.
Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.
Most wireless headphones use Bluetooth to communicate with the device, and in some cases, there may be a problem with the connection between the mobile app and the headphones.
If you are using wireless headphones with your mobile device, make sure your mobile device OS and headphone app are up to date.
Earphone-type wireless headphones are more susceptible to connection issues, such as broken connections, out-of-sync, and dropped calls than other wireless headphones due to their form.
In some cases, when communication is lost, your head itself is blocking the signal, which can be challenging to resolve.
Some headphone manufacturers say that updating the firmware may improve synchronization and other issues, but not all headphones.
Nevertheless, there may be solutions on the manufacturer’s website, including firmware updates, so you should check them out.
Of course, you need to keep your firmware up to date.
* If the [Bluetooth] function is [Off], set it to [On].
Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.
The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.
* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.
This completes the pairing process with the headphones.